Solenoid coil
Product type
| DC/AC | 24V/110V/220V | X |
| Current | voltage | note |
Performance parameters
⚫ Voltage ：DC24V 、AC110 V
|
|
Inrush VA |
Holding VA |
Power consumption |
|
DC24V |
- |
- |
24W |
|
AC110 V |
28.6 |
13.2 |
6.6W |
|
AC220V |
28.6 |
13.2 |
6.6W |
⚫ working pressure：0.2MPa~0.6MPa；
⚫ Degree of protection：IP65；
⚫ Temperature range：-10℃~50 ℃；
⚫ Insulation: Insulation resistance coil housing ≥1MΩ; when the nominal input voltage ≤24V, it can withstand AC500V, 50Hz voltage; and when nominal input voltage> 24V and ≤220V , it can withstand AC1500V, voltage of 50Hz;
Structure and size description
Materials Description
| Coil shield | BMC |
| Yoke | DT4/H62 |
| Winding | PPS/H62 |
| Plug-in | H62 |
| Threaded insert | H62 |
| Protective sleeve | ABS |
| Connectors body & Seat | ABS |
| Screw | 304 |
| Sealing ring | NBR |
| Label | Quit stickers |
Installation
The coil assembly shall comply with the electrical rules to ensure that the cable entries are properly sealed. Tighten the screw jack to the power center, a maximum of 0.6N · m. Outside Shell can not be deformed. Ensure that the terminal polarity sign + and - are correct. If there is no notes, then the supply line can be connected to either end.
Safety
These safety measures are only related to a single electromagnetic pulse valve. If combined with other components of the device, there may be other potential hazards, it must perform a risk analysis of the system by putting these into account.
⚫ dangerous! To avoid the danger of burning, be careful not to touch the surface of the coil. its surface continuous working temperature up to 120 ℃.
⚫ dangerous! For security reasons, it must be accurate to connect wires to the ground terminal for this purpose.
⚫ When connecting other components, please ensure that the power supply has been cut off.
⚫ Without armature guide tube or AC solenoid wire , it will get burn.
⚫ Avoid prolonged immersion in the liquid used.
Information
| Coil shield | BMC |
| Yoke | DT4/H62 |
| Winding | PPS/H62 |
| Plug-in | H62 |
| Threaded insert | H62 |
| Protective sleeve | ABS |
| Connectors body & Seat | ABS |
| Screw | 304 |
| Sealing ring | NBR |
Trading Information
| Trading Information | Logistic | |||||||
| Description | Piece/Pieces | FOB Price | Payment terms | Quantity Pieces |
Time | Port | Monthly Piece/Pieces |
Packing |
| Solenoid coil 135-415 | >100 | 7 | T/T,Western Union,MoneyGram,Paypal | 300 | 10 | Shanghai | 100000 | water proof bag and ctns |
| 100-1000 | 6 | |||||||
| >1000 | 5 | |||||||
