QHK-ZX-12D Pulse Controller Drive Solenoid Pulse Valve
What is the maximum working pressure of the QHK – ZX – 12D pulse controller
Can the QHK – ZX – 12D pulse controller be used in a hazardous environment?
The specific parameters of the QHK – ZX – 12D pulse controller are as follows:
1. Output Channels
It has 12 output channels.
2. Output Voltage
The output voltage can be either 24V or 220V.
3. Dimensions
The external dimensions are 160×160×90mm.
4. Pulse Width
The default pulse width is 0.50s, and it can be set within the range of 0.01 – 99.99s.
5. Pulse Interval
The default pulse interval is 1s, and the setting range is from 1 to 9999s.
6. Cycle Interval
The default cycle interval is 1s, and it can be set within the range of 1 – 9999s.
7. Startup Function
- Option 1: It starts running immediately upon power – on.
- Option 3: It operates in differential pressure mode. When the conditions are met, it runs according to Mode 1. When the conditions are not met, it continues the blowing until the current cycle is completed.
8. Other Parameters
- The rated input voltage is 220V AC (±10%), 50 – 60HZ (or other specifications).
- The rated output current is 0.8A, and the power consumption is 5W.
- It is designed to be used in an environment with a temperature range of – 25°C to + 55°C. The relative humidity of the air should not exceed 85%. There should be no severe corrosive gases, conductive dust, and no strong vibrations or shocks.
Write your message here and send it to us
